четверг, 22 сентября 2011 г.

How To Handle The Heat On Laptops

In your opinion, how do I handle the heat on the laptop?
Is it enough to wear alone cooling pad? Apparently there are many more ways a more effective! What are some great tips to overcome the heat on your favorite laptop?
1. Use a cooling pad
The most common way but use cooling pad is less influential. cooling pad cheapest yg best only lowers the temperature of  CPU 1-5C

2. Clean the heatsink fan notebook from dust
usually if the laptop was using that long, then the dust will accumulate on the fan & heatsink. dust will block the blast of hot air out, so your CPU would like in the desert..

3 Replace the CPU thermal paste
after cleaning the heatsink of dust, do not forget to replace the thermal paste. Thermal paste does not work to actively cool the cpu, but makes the transfer of heat from the CPU to the heatsink to be nicer. if you want to replace the thermal paste but dusty heatsink or fan is not running normally, would not give meaningful effect.

4. The Room Temperature
room temperature is highly influential on the laptop heat.
If the room temperature too hot then the laptop will come into heat

5. Undervolting
Well, who is a direct way to reduce heat in the CPU itself by using the s / w with a total cost of 0, the result could beat all the points above

What is Undervolt it? undervolting is the process of reducing the excess voltage to the CPU by using the software. Undervolting does not affect performance at all. affecting performance is the overclock and underclock. Undervolting is not the same as underclocking

Not all the same processors, each processor models have different voltage tolerances. But rather than busy to set the lowest stable voltage to each chip, Intel is using a standard voltage that is stable (and high) to each chip.

The problem is the manufacturer of very high standard voltage
(automatically add high-temperature cpu). Undervolting try to tune to the lowest stable voltage

Undervolting is time-consuming process, because we have to find the lowest stable voltage for each multiplier on the CPU. Multiplier associated with SpeedStep technology, rather than working full cpu power each time, the multiplier used to adjust dynamically the cpu clock (the multiplier: 6x, 7x, 8x, etc.). But if I had to voltage instability.

Lastly, use the tools HWMonitor to monitor the voltage and temperature of the laptop



Source: Click Here

Комментариев нет:

Отправить комментарий